W.O.T. Shift Kit

6XD Sequential Transmission Module.

Our Xineering W.O.T. (Ignition Cut) Module is essential to any sequential transmission Pkg.

Top Performance

Xineering Software

N

Will Integrate w/ Throttle Blip Downshift

N

100% RACE READY!

W.O.T. Shift (Ignition Cut) Modules

Plug-n-Play

WOT Shift

Coil-on-plug

Road Racing

Drag Racing

MSD Pkg Option

6XD Wide Open Throttle Module Description:

“Our Xineering W.O.T. (Ignition Cut) Module is essential to any sequential transmission Pkg.”
An accurate torque reduction during up-shifts at WOT or down-shifts under braking is required to get the most performance out of your sequential gear set.

Torque reduction is performed by programmatically cutting power by a specified % to the ignition coils during a shift event. The dog-ring engagement and disengagement of a sequential transmission is dependent on the lightest torque reduction to perform the fastest shifts.

Xineering Software:

Our Xineering software business partner provides the race engineer and/or engine tuner the ability to cut the ignition coil power by a given duration and/or percent based on the gear that the transmission is shifting into. (*** When the transmission is equipped with a gear position sensor ***)

Closed-loop Operation:

Closed-loop operation is available for sequential transmissions equipped with high resolution gear position sensors such as the Blade360 or Motec rotary sensor as our 6XD sequential uses.

Systems can be configured to integrate “Throttle blip downshift” as well regarding Road-Racing Needs.

System Inputs:

  • Gear Position Sensor
  • Load Cell Shift Knob (Push-Pull)
  • RPM (optional)
  • Throttle Position (optional)

Calibratable Parameters:

  • Down-shift Load Cell Threshold (mV)
  • Up-shift Load Cell Threshold (mV)
  • Ignition Cut %
  • Delay after Threshold. (ms)
  • Time between shifts (ms)
  • Blip Target %
  • Calibrate Gear Position Sensor
  • Shift duration by gear (ms)
  • Up-shift Table
  • Down-shift Table

Contact Us about your vehicle platform and programmable throttle needs.

WOT Shift Kit
6XD Wide Open Throttle Shift Module

Only the Best

9

Award Winning Customer Service & Installation Assistance

We’re 100% committed making sure YOU are taken care of with experienced guidance and assembling!

9

Everything you need for a Plug n Play W.O.T. package!

As well as everything you need for your DBW Throttle / Downshift Blip Module.

9

Effort Equals Results

6XD Your one stop shop for Race Ready SUCCESS!

W.O.T. Shift Module

Get the most performance out of your 6XD sequential gear set by including a W.O.T. shift module!

Clutchless Part Throttle

Downshift Wot Pull Early Shifting

Contact Us

6XD GEARBOX

Rick Lamber | 714-290-5276

703B Mooresville Road, Kannapolis, NC 28081

6xdgearbox@gmail.com

Clay Stephens | 770-317-8121

703B Mooresville Road, Kannapolis, NC 28081

6xdgearbox@gmail.com